Collection of commonly used Pinouts


====== PC Paralell port ======

This if from the Linux Device Drivers Book:

{{parport.png}}

====== SCART ======

SCART is the abbreviation for the french term 'Syndicat des Constructeurs d'Appareils Radiorecepteurs et Televiseurs'.

Table 1 was the original and allows for composite video input/output, RGB inputs and stereo audio. Table 2 was added to take S-video (S-VHS and Hi-8) inputs. This made pin 15 chrominance and pin 20 luminance.

Many TV sets have 2 SCART sockets. One is usually like table 1 and the other like table 2, and pin 20 switchable from composite to S-Video luminance.
The first can switch from a composite input to RGB input. The second can switch from a composite input to an S-Video input, pin 20 being either composite in or luminance in. Usually the second socket outputs a selectable composite signal on pin 19. 

(from http://www.bnoack.com/data/cables/scart-pinout.html )

==== SCART CONNECTOR PINOUT Table 1 ====

{{ scart.jpg}}

^Pin ^ Signal ^ Level ^ Impedance ^
| 1  | Audio Out Right | 0.5 V rms | <1k ohm |
| 2  | Audio In Right | 0.5 V rms  | >10k ohm |
| 3  | Audio Out Left + Mono | 0.5 V rms | <1k ohm |
| 4  | Ground Audio |   |   |
| 5  | RGB Ground Blue |   |   |
| 6  | Audio In Left + Mono | 0.5 V rms | >10k ohm |
| 7  | RGB Blue In or Out | 0.7 V | 75 ohm |
| 8  | Audio/RGB switch / 16:9  |High(9.5-12V) AVmode  Lo(0-2V) TVmode | >10kohm |
| 9  | RGB Ground Green |   |   |
| 10 | Comms Data 2 |   |   |
| 11 | RGB Green In or Out | 0.7 V | 75 ohm |
| 12 | Comms Data 1 |   |   |
| 13 | RGB Ground Red |   |   |
| 14 | Ground Data |   |   |
| 15 | RGB Red In or Out / Chrominance In or Out | 0.7 V (Chrom.: 0.3 V burst) | 75 ohm |
| 16 | Switching Signal between: | High(1-3V) RGB   Lo(0-0.4V) Composite | 75 ohm |
| 17 | Ground Composite Video |   |   |
| 18 | Ground Blanking Signal |   |   |
| 19 | Sync Out or Composite Video Out | 1V including sync | 75 ohm |
| 20 | Sync In or Composite Video In  | 1V including sync | 75 ohm |
| 21 | Ground/Shield (Chassis)  |   |   |

==== SCART CONNECTOR PINOUT Table 2 ====

{{ scart.jpg}}

^Pin ^ Signal ^ Level ^ Impedance ^
| 1  | Audio Out Right | 0.5 V rms | <1k ohm |
| 2  | Audio In Right | 0.5 V rms  | >10k ohm |
| 3  | Audio Out Left + Mono | 0.5 V rms | <1k ohm |
| 4  | Ground Audio |   |   |
| 5  | RGB Ground Blue |   |   |
| 6  | Audio In Left + Mono | 0.5 V rms | >10k ohm |
| 7  | - | - | - |
| 8  | Fuction Select |High(9.5-12V) AVmode  Lo(0-2V) TVmode | >10kohm |
| 9  | RGB Ground Green |   |   |
| 10 | Comms Data 2 |   |   |
| 11 | - | - | - |
| 12 | Comms Data 1 |   |   |
| 13 | RGB Ground Chrominance |   |   |
| 14 | Ground Data |   |   |
| 15 | Chrominance In | 0.3 V | 75 ohm |
| 16 | - | - | - |
| 17 | Ground (luminance)|   |   |
| 18 | - | - | - |
| 19 | Video output (composite)  | 1V including sync | 75 ohm |
| 20 | Luminance input | 1V including sync | 75 ohm |
| 21 | Ground/Shield (Chassis)  |   |   | 


====== SVIDEO ======

==== S-Video Connection Pinout ====

{{ s-video2.gif| svideo - male connecotor solder side}} 

^ PIN 	^ DESCRIPTION 	^^ Impedance 	^ Level ^
| 1 	| GND 	        | Ground (Y) 	|	|   |
| 2 	| GND 	        | Ground (C) 	|	|   |
| 3 	| Y 	        | Intensity (Luminance) | 75 Ohms | 1V incl. Sync.|
| 4 	| C 	        | Color (Chrominance)   | 75 Ohms | 0.3V Burst |

(picture: male connecotor solder side)