Collection of commonly used Pinouts

PC Paralell port

This if from the Linux Device Drivers Book:

SCART

SCART is the abbreviation for the french term 'Syndicat des Constructeurs d'Appareils Radiorecepteurs et Televiseurs'.

Table 1 was the original and allows for composite video input/output, RGB inputs and stereo audio. Table 2 was added to take S-video (S-VHS and Hi-8) inputs. This made pin 15 chrominance and pin 20 luminance.

Many TV sets have 2 SCART sockets. One is usually like table 1 and the other like table 2, and pin 20 switchable from composite to S-Video luminance. The first can switch from a composite input to RGB input. The second can switch from a composite input to an S-Video input, pin 20 being either composite in or luminance in. Usually the second socket outputs a selectable composite signal on pin 19.

(from http://www.bnoack.com/data/cables/scart-pinout.html )

SCART CONNECTOR PINOUT Table 1

scart.jpg

Pin Signal Level Impedance
1 Audio Out Right 0.5 V rms <1k ohm
2 Audio In Right 0.5 V rms >10k ohm
3 Audio Out Left + Mono 0.5 V rms <1k ohm
4 Ground Audio
5 RGB Ground Blue
6 Audio In Left + Mono 0.5 V rms >10k ohm
7 RGB Blue In or Out 0.7 V 75 ohm
8 Audio/RGB switch / 16:9 High(9.5-12V) AVmode Lo(0-2V) TVmode >10kohm
9 RGB Ground Green
10 Comms Data 2
11 RGB Green In or Out 0.7 V 75 ohm
12 Comms Data 1
13 RGB Ground Red
14 Ground Data
15 RGB Red In or Out / Chrominance In or Out 0.7 V (Chrom.: 0.3 V burst) 75 ohm
16 Switching Signal between: High(1-3V) RGB Lo(0-0.4V) Composite 75 ohm
17 Ground Composite Video
18 Ground Blanking Signal
19 Sync Out or Composite Video Out 1V including sync 75 ohm
20 Sync In or Composite Video In 1V including sync 75 ohm
21 Ground/Shield (Chassis)

SCART CONNECTOR PINOUT Table 2

scart.jpg

Pin Signal Level Impedance
1 Audio Out Right 0.5 V rms <1k ohm
2 Audio In Right 0.5 V rms >10k ohm
3 Audio Out Left + Mono 0.5 V rms <1k ohm
4 Ground Audio
5 RGB Ground Blue
6 Audio In Left + Mono 0.5 V rms >10k ohm
7 - - -
8 Fuction Select High(9.5-12V) AVmode Lo(0-2V) TVmode >10kohm
9 RGB Ground Green
10 Comms Data 2
11 - - -
12 Comms Data 1
13 RGB Ground Chrominance
14 Ground Data
15 Chrominance In 0.3 V 75 ohm
16 - - -
17 Ground (luminance)
18 - - -
19 Video output (composite) 1V including sync 75 ohm
20 Luminance input 1V including sync 75 ohm
21 Ground/Shield (Chassis)

SVIDEO

S-Video Connection Pinout

 svideo - male connecotor solder side

PIN DESCRIPTION Impedance Level
1 GND Ground (Y)
2 GND Ground (C)
3 Y Intensity (Luminance) 75 Ohms 1V incl. Sync.
4 C Color (Chrominance) 75 Ohms 0.3V Burst

(picture: male connecotor solder side)

 
wiki/pinouts.txt · Last modified: 26.10.2006 16:00 (external edit)